Installation guide base on a Acura TL for Direct Fit LED Interior Lights.
You can find this product under Acura TL Direct Fit LED Interior Kit (ACURA-TL-DF16).
1.) Remove the clear plastic lenses using a flat head screw driver or flat trim removal tool.
2.) Remove the original bulb and insert the adapter from our LED panel into the socket. Position the LED panel accordingly as how the picture shows. Test the light to make sure it works, if it does not turn on, attempt the troubleshoots we offer for our LED bulbs.
3.) Repeat the same steps for the other side.
4.) Use the same tools as before to remove the clear plastic lens from the rear dome lights.
5.) Install the adapter into the socket and position the LED panel into place. Test the lights to make sure they work before putting back the lenses.
6.) Enjoy your new lights!