1.) This guide will assume that you know how to take off your bumper. Once you have taken off your bumper, lay it on towels on the ground (to prevent scratches on your bumper).
2.) Remove the lower fog lamp/grill portion and set aside. The LED Daytime Running Light (LED-DDL-SKU78) comes with "L" brackets and screws which you can use to mount onto the vehicle.
3.) Measure twice carefully and cut once. Insert the LED Daytime Running Light through the cut opening and use the supplied brackets to mount onto the vehicle. You may need to use additional hardware to mount onto the vehicle, this will vary depending on how you have it installed.
4.) Connect the two sides of the lights together using the supplied harness and route the wires to a power source you want the lights to turn on with. Ground the negative wire to bare metal on the chassis and tap the red positive wire to a power source you want the lights to turn on with.
5.) Install the lower fog lamp/grill portion back onto the bumper, re-install the bumper onto the vehicle, and enjoy your new LED Daytime Running Lights!
***Prior to installation, we recommend that you carefully measure the dimensions of the light and area you are installing the lights onto first before you take apart your car and mount the lights. Since these lights are universal and does not have a specific application, it may not fit all vehicles. PLEASE TEST THE LIGHTS PRIOR TO INSTALLING TO ENSURE THEY ARE WORKING***