Guide on How to Easily Install Truck SUV LED Pod Lights

This is a general installation guide for how to install our LED pod lights on your truck or SUV. For this walkthrough, we will be using the Ford F-250 as a reference. We recommend referring to your LED pod light's corresponding installation guide included in your package or online at our LED fog lighting guide page.

Note that every package will come with a metal bracket that you need to mount the LED pod light and the OEM bezel together.

Step 1: Locate the mounting location for your truck or SUV's LED pod lights. This can be found behind the wheel well liner and is accessible by turning your wheel inwards.

General LED Fog Light Installation

Step 2: Unplug the stock harness and remove the existing pod lamp by loosening the three bolts on the back support bracket.

General LED Fog Light Installation

General LED Fog Light Installation

Step 3: Secure the included mounting metal bracket to the back plate/bracket.

General LED Fog Light Installation

 

Step 4: Assemble the LED pod light. Follow our guide on how to assemble your LED pod light in the video below:

Step 5: Secure the LED pod light to the metal bracket and tighten by threading a nut and washer through the bolt of the LED pod light.

General LED Fog Light Installation

Step 6: Attach the garnish bezel to the back support plate through the inner center holes. Reinstall the back support bracket.

General LED Fog Light Installation

Step 7: Connect the wires of your LED pod light to an existing wire harness.

Step 8: Make sure all lights are functioning as they should. Reattach the wheel well liner to finish up.

General LED Fog Light Installation