The following steps apply to our 4 pc. CREE LED pod lights (70-201), 4 pc. 10W CREE high power LED fog lights (70-209), and the 6 pc. 10W CREE high power LED fog lights (70-283).
This is a tutorial that will show you how to install a set of LED pod lights onto the lower bumper fog area of the 2010-2014 Ford F-150 Raptor. With our specially crafted Ford Raptor support brackets, you can mount up to 3 of our uniquely designed circular faced LED pod lights or 2 of the industry standard LED pod lights.
Shown below: Triple 10W high power CREE LED pods
Step 1: Preassemble the pod light brackets. Slide the bolt through the wide side of the steel U-shaped bracket. Place the black piece in between the U-bracket's holes and slide the longer bolt through the holes. Secure the connection with a nut.
Step 2: Using the included mini Allen wrench, place the pod light bracket piece on the LED pod light and thread the small bolt through to finish the preassembling process. Repeat steps 1 and 2 as needed.
Step 3: Bolt on the LED pod lights onto the specially designed metal mounting bracket.
Step 4: Mount the LED pod light/bracket assembly underneath the frame of your truck. Repeat this step on the other side.
Step 5: Wire the LED pod lights using the included relay wiring harness.
Step 6: Test your LED pod lights to make sure everything works. Once you've confirmed full functionality, you can now enjoy the high output of your new Ford Raptor LED fog lights!
Find this and more offroad truck LED lighting today!